Available!
PRAG 10KVA 48V INVERTER W-EY (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch that forms one complete system with
₦2,131,600
Available!
| Inverter Output | |
| Model | PT-INV-10KVA/9000W 48V-Color LED, Wall-H |
| Continuous Output Power | 9000W |
| Surge Rating(20s) | 24000W |
| Capable of Starting Electric Motor | 8HP |
| Output Waveform | Pure Sine wave/Same as input(Bypass mode) |
| Nominal Efficiency | >88%(Peak) |
| Line Mode Efficiency | >95% |
| Power Factor | 0.9-1.0 |
| Nominal Output Voltage rms | 220-230-240Vac |
| Output Voltage Regulation | ±10% RMS |
| Output Frequency | 50± 0.3Hz/60± 0.3Hz |
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) |
| Typical transfer Time | 10ms(Max) |
| THD | < 10% |
| DC Input | |
| Nominal Input Voltage | 12.0Vdc |
| ( *2 for 24Vdc, *4 for 48Vdc) | |
| Minimum Start Voltage | 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
| Low Battery Alarm | 10.5Vdc/11.0Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
| Low Battery Trip | 10.0Vdc/10.5Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
| High Voltage Alarm & Fault | 16.0Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
| High DC Input Recovery | 15.5Vdc |
| Low Battery voltage recover | 15.5Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
| Idle Consumption-Search Mode | < 25 W when Power Saver On |
| Charge | |
| Input Voltage Range | Wide: 90~135VAC / 164~243VAC Narraw: 100~135VAC / 194~243VAC |
| Input Frequency Range | Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz |
| Output Voltage | Depends on battery type |
| Charger Breaker Rating | 40A |
| Max Charge Rate | 50 + 5A/30 + 5A (* 50A for 24V and 30A for 48V) |
| Over Charge Protection Shutdown | 15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc) |
| Charger curve(4 stage constant current) 4 step digital controlled progressive charge |
Battery types ( *2 for 24Vdc, *4 for 48Vdc) |
| Battery type | Float Vdc |
| Gel U.S.A | 13.7 |
| A.G.M 1 | 13.4 |
| A.G.M 2 | 13.7 |
| Sealed Lead Acid | 13.6 |
| Gel Euro | 13.8 |
| Open Lead Acid | 13.3 |
| Calcium | 13.6 |
| De-sulphation | 15.5 for 4hrs |
| Remote Control | Yes. Optional |
| Bypass & Protection | |
| Input Voltage Waveform | Sine wave (Grid or Generator) |
| Nominal Voltage | 220Vac |
| Low Voltage Trip | 184V/140V±4% |
| Low Voltage re engage | 194V/150V±4% |
| High Voltage Trip | 253V/270V±4% |
| High Voltage re engage | 243V/260V±4% |
| Max Input AC Voltage | 280VAC |
| Nominal Input Frequency | 50Hz or 60Hz (Auto detect) |
| Low Freq Trip | Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz Wide:40±0.3Hz for 50Hz/60Hz |
| Low Freq re engage | Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz Wide:42±0.3Hz for 50Hz/60Hz |
| High Freq Trip | Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz Wide: 70±0.3Hz for 50Hz/60Hz |
| High Freq re engage | Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz Wide: 68±0.3Hz for 50Hz/60Hz |
| Output Short circuit protection | Circuit breaker |
| Bypass breaker rating | 63A |
| Transfer switch rating | 80amp for UL |
| Max bypass current | 80amp |
| Mechanical Specification | |
| Mounting | Wall mount |
| Inverter Dimensions(L*W*H) | 588*415*200mm |
| Inverter Weight | 66KG |
| Shipping Dimensions(L*W*H) | 750x520x310mm |
| Shipping Weight | 68KG |
| Display | Status LEDs / Status LEDs+LCD |
| Standard Warranty | 1 Year |
