EPSolar PWM Solar Charge Controller 30A

SKU: 3489 Categories: , Tag:

Out of stock

30A, 12/24V, Programmable

Buy through any of the following:

15,000

Out of stock

Description

Overview

  • Three system voltage configuration : 12V, 24V or 12V/24V auto work
  • High efficiency PWM charging with temperature compensation
  • 3 LEDs shows PV charging, battery and load status
  • External temperature sensor interface
  • RS-485 bus communication
  • Open standard Modbus communication protocol
  • Software update function

 

More powerful function via MT50 or PC

  • Diversified load control modes : Manual, Light ON/OFF, Light ON+ Timer, Time Control
  • Battery type selection: Gel, sealed, flooded and User type
  • Real-time monitor
  • Programmable parameters
  • LVD  or SOC load disconnect function
  • Energy statistics function

Electronic Protections

  • PV short circuit
  • PV reverse polarity
  • Battery overcharge
  • Battery over discharge
  • Battery reverse polarity
  • Load short circuit
  • Load overload
  • Overheating

Buy through any of the following:

Specifications

Model VS6048BN
Nominal system voltage 12/24/36/48V auto work
Rated battery current 60A
Rated load current 60A
Max. battery voltage 64V
Equalize charging voltage Sealed: 14.6V,  Flooded: 14.8V,  User-defined: 9~17V
Boost charging voltage Gel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V, User-defined: 9~17V
Float charging voltage Gel /Sealed /Flooded: 13.8V,  User-defined: 9~17V
Low voltage reconnect voltage Gel /Sealed /Flooded: 12.6V,  User-defined: 9~17V
Low voltage disconnect voltage Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V
Self-consumption ≤15mA(12V); ≤10mA(24V); ≤9mA(36V); ≤8mA(48V)
Grounding Common negative
Temp. compensation -3mV/℃/2V
Relative humidity 10%~90% Non-condensation
Communication RS485 / RJ45 interface
LCD temperature -20℃ ~ +70℃
Working temperature -25℃ ~ +55℃
Humidity ≤95% N.C.
Enclosure IP30
Overall dimension 205x174x64mm
Terminals 35mm2
Net weight 1.5kg